How to Install the LED Tube Lights?
We are familiar with LED tube lights in our daily very much. We know how to use it correctly in our home. If we don’t know how to install it, it will cost a lot of money to install it. Once we can install it by ourselves, we can save some costs. Of course there are some tips below.
* When you get started installing LED tube lights in place of fluorescent tube lights, you will realize there are three main components: the ballast, the starter and the tube light. Now, the starter may not be a separate component in the entire circuit and is sometimes built in the ballast itself.
* Remove the old bulbs from the fixtures and make sure the electricity is turned off while doing it. You may need simple tools like screw drivers, wires, wire stripper and cutter, some nuts and bolts. You must keep them all handy.
* Once the old bulbs or tube lights are taken off, you will have to remove the reflector that is close to the wiring and the ballast as well. Usually, it is simple to detach the reflector, you may use the screw driver to do this. In the process of detached the reflector, you must cut off the electricity to keep safe. It is also important to use the right tools.
* Now, you have to get rid of the ballast and starter (if they are present). The ballast will have two screws holding it, just unscrew them using a screw driver and dispose it off. While doing it, the wiring attached to it would also be removed. Reconnect the wires in the fixture so as to complete the circuit.
* You are almost there! Fix the reflector back in its place and insert the LED tube lights in the sockets. Now, while inserting the LED tube lights you ought to be sure of the top and bottom ends, and have to be fixed into the circuit likewise. If you are unable to identify the top and bottom refer to the instructions provided by the manufacturer, you must turn to experts for help. After they are better than you at doing it.
* Once you have installed the LED tube light in the fixture, you can turn on the mains or electricity. If all the connections are proper and the fittings are done in the correct manner, you will have a better illumination. Your project does not come to end here, it is important that you dispose off the old fluorescent bulbs or tube lights properly according to the local regulations. After all, these bulbs contain small amounts of toxic mercury that are highly hazardous. The old fluorescent bulbs are bad for our health. LED flood light and other lights are available in the website: www.gcledlight.com