Secret LED lamps use rules and methods for maintenance
Choose LED lamps,LED tube light , we take into account that it is undoubtedly more energy-efficient , environmentally friendly, no flicker , but in the case of long-term use , LED lamps also have wear and tear, plus some wrong operation , can be easily damaged LED lamps. Even the LED lamps, also need a good maintenance in order to maximize the effectiveness and have a longer service life. 2013 With the popularity of LED lighting , more and more consumers are asked about LED maintenance issues .
LED tube light under what circumstances will be bad ?
A ) poor quality of the LED lamps more often fails to look for when buying a quality assurance brand to buy.
2 ) not in accordance with product instructions for proper use of LED tube light prone to failure , there is a risk.
3 ) When used excessive current exceeds the rated current of LED lamps , LED driver power will result in the breakdown of some components burned, or other hazards.
4) LED lamps " mist " issue, pointed candle light , bulb lights, spot lights and other lights after a period of housing in the inner wall of water droplets , mist phenomenon. LED lamps are generally the assembly of several different materials , such as heat lamp cup part of the metal , the plastic lampshade ; lamps work in a certain amount of heat is generated , different materials with different coefficients of thermal expansion , long-term use in the bonding of different materials, a gap is generated at the inlet ; when the humidity is relatively large when used in an environment , the type of lamp and external temperature , the internal lamp shade gases heated cold place , if this gas contains more water vapor , will produce water the phenomenon of fog and water droplets , continue to light for some time , this phenomenon will disappear. Therefore , humid environment is also affected LED tube light life factor.
LED use rules and methods for maintenance :
A , buy lamps , the first not busy installing , you should read the installation instructions carefully , and then follow the installation instructions in accordance with good lighting, otherwise there may be dangerous.
Second, cleaning and maintenance , do not change the structure of light , do not arbitrarily change the lamp parts, after maintenance , the lamp should be installed as well, not to leave , the wrong equipment lighting components .
Fourth, try not to use lamps frequent switching , although the LED light resistance switching times are ordinary fluorescent lamp 18 times, but too often still affect the life LED lights internal electronic components , thus affecting the lamp life .
Five , in particular, to note that , except in special LED tube light , the ordinary LED lamps should be avoided in wet environments. , Humid environment will affect the LED tube light driver power electronic components , electronic components, moisture, shorten lamp life .
Therefore , moisture is the key lighting maintenance , especially the bathroom , the bathroom and the kitchen stove LED light lamp shade moisture must be installed to prevent moisture ingress , corrosion damage or leakage to avoid short circuit.
Finally , LED tube light is best not to use water to clean , just wipe with a dry cloth dipped in water , if you accidentally hit the water to try to dry , avoid immediately after the lights with a wet cloth.
Tips:
1 ) LED tube light can not be ordinary lamp dimmer , delay switch , sensor switch in the circuit .
2 ) Avoid high temperature and humidity environments
3) LED internal lighting is mainly supply -driven, non-professionals do not recommend self- handling assembly, in order to avoid electric shock hazard.
4) LED lighting lamps are generally in the ambient temperature of 5 ~ 40 ℃ circumstances.
5) LED lighting metal part can not be free to use polish powder chemicals .
6) LED lighting behind the dust suitably clean , dry cloth or duster .